PERMA CONSTRUCTION AIDS PVT. LTD.
Crack Filling Epoxy Putty

Crack Filling Epoxy Putty

Send Inquiry

With the support of our experienced chemical engineers, we are engaged in providing Crack Filling Epoxy Putty. The offered putty is widely used for filling fine cracks, depressions and repairing honey combs in the concrete. Further, this putty is processed using supreme quality raw material and advanced techniques in compliance with international quality standards. This Perma MASTER PITCH can be availed from us in various air tight packing options at highly competitive rates.

Our vended Crack Filling Epoxy Putty is available under the brand name "Master Fill - EP". As the name implies, the mentioned product is widely used to be filled into the cracks of the concrete walls that have caused by the damaging effects of pollution and rain. The product comprises of two components that require thorough mixing of the both. This product finds usage during the repairing of honey combs in the structures made of concrete. Since Crack Filling Epoxy Putty is prepared using only water as the solvent, it is non-toxic in nature and produces minimum carbon footprint on the environment.

Primary Uses:

  • For smoothing out the metallic and concrete surfaces
  • To treat the blemishes over structural surface
  • Filling of cracks before painting

Guide To Application:

Begin by priming the area (in case it is uneven and rough) using Perma Master PITCH. The base and the reactor components of this Crack Filling Epoxy Putty, Perma Master Fill-EP, should be then mixed to form a paste having a fine consistency. Use spatula or putty blades for smearing the paste onto the primed surface. You can also add mixed Perma Master Prime-CN to the paste for improving its texture. Find details in the points highlighted below:

  • All the components (Base and reactor) are thoroughly mixed in equal proportions until homogenous and even colored paste is formed.
  • For achieving the optimum results, the mentioned product is used in combination with Master Prime - CN.
  • Spatula or putty blade is used to apply the putty over the areas that are to be repaired.

Advantages:

  • Good durability
  • Easy mixing of only two components required
  • Safe to be mixed by hands
  • Free of solvents
  • Good resistance to chemicals
  • Non slump, and gives ease of application on vertical surfaces
  • Re-coating is not required
  • Cures easily without shrinking

Properties:

  • Specific Gravity: 1.7
  • Solids: 100%
  • Compressive Strength: 70 N/mm2
  • Pot Life: 45 mins
  • Drying Time:     12 hrs
  • Reusable Time: 1-2 days
  • Full Cure: 7 days       

Equipment Care:

  • Equipment used must be properly cleaned post use using a good quality cleaning solvent.

Health And Safety:

  • As Epoxy products are known to irritate skin, it is recommended that hand gloves are worn while dealing with the product. Packing material used should be burnt & then buried after work completion.

Packing:

  • PERMA MASTER PITCH Available in 1 KG packs.

Shelf Life:

  • 12 months/ 1 year from the original date of manufacture.

Coverage:

  • 60 running metre for 5 mm wide groove / kg.