Epoxy Flooring for Concrete

Epoxy Flooring for Concrete

Send Inquiry

We are a noteworthy manufacturer, exporter and supplier of high quality Epoxy Flooring for Concrete. This flooring is processed using superior quality raw material and advanced technology by our highly accomplished professionals with utmost precision. Furthermore, the offered flooring is used to repair dams, tunnels, spillways, bridge girders, etc. Furthermore, the offered flooring is tested on various quality parameters by our experts to assure its high quality and durability. Clients can avail this PERMA MASTER FLOOR HDM BASE at market leading rates.

Our offered Epoxy Flooring for Concrete is offered under the brand name “PERMA MASTER FLOOR HDM BASE” that has be prepared with lower viscosity level for easy flowing. This product is entirely based upon the epoxy resin system to render effectiveness during the repair of structures made of concrete. The mentioned product also finds usage to prevent the water contact of reinforcement in structures for holding water on either side of the building. Moreover, it allows exceptional waterproofing the leaky and porous structures.


  • Excellent resistance to slip & abrasion
  • Easy to apply & use
  • Good strength
  • Not prone to quick reactions with chemicals and other aggressive substances

Typical Properties:

  • Compressive strength: 80 N/mm2 30°C
  • Bond Strength: A) In Concrete 3 N/mm2, B) In Steel 15 N/mm2
  • Density: 2000 kg/m3
  • Flexural strength: 50 N/mm2 30°C
  • Pot Life: 20 min at 30°C
  • Tensile strength: 18 N/mm2 30°C
  • Storage Condition: +10 °C + 40°C
  • Chemical Resistance: Resistant to different types of chemicals, oils, etc.

Directions For Use:

Surface Preparation

When using in concrete surfaces, ensure the surface is completely free of grease, oil, dust, etc., as any form of laitance present will hamper the application process. The substrate receiving the screed should be sound.


The surface should be then properly dried and primed using PERMA MASTER FLOOR HDM BASE.


First, mix the liquid components together in a mechanical pan type resin mixer. After mixing the liquids, add the aggregate component to this mix. Ensure the aggregate is dispersed.


The mixed Perma Master Floor (HDM) in its tacky form should be then smeared properly & evenly onto the primed surface in the desired thickness. Follow this by giving finish to the surface with a steel trowel.

Health And Safety:

To ensure optimum safety, always wear protective gloves while handling Perma Master Floor (HDM). It is also advised that any kind of packing material be disposed off properly after being burnt once the job is done.

  • Covers 5.4 sq. ft / kg / mm thickness of the screed.


  • PERMA MASTER FLOOR HDM BASE Available in 10 kg packs & in bulk

Shelf Life:

  • 12 months from the manufacturing date