Backed with ISO 9001:2008 certification, we are considered as the prime manufacturer, exporter and supplier of Perma Silicone Sealant. The provided sealant is ideal for applying over a wide range of non porous surface like glass, ceramics tiles and aluminum profiles for binding applications. This sealant is processed using pristine quality silicon under the stern guidance of our ingenious professionals as per international quality standards. Available in several packaging options, this Perma Silicone Sealant is offered to the clients at marginal prices.
For the application process, the joint that requires sealing should be designed in a way that these do not lead to sealant stress of any kind. The joints should be thoroughly cleaned using an oil free solvent that can be applied onto the joints with a brush. Next, masking tapes should be applied on both the joint sides. These tapes are to be removed as soon as the bead is complete. Apply the sealant and once it dries, clean the surface. A sealant cartridge gun can be used for the process. Break the cartridge seal only before use. Follow this by tooling the joints in single continuous stroke and remove the masking tapes.
Data After 7 Day Cure at 25°C & 50% Rh:
Health & Safety:
Uncured sealant when comes in contact with eye and the skin might lead to irritation. Exposure to sealant vapor is also hazardous and might cause irritation to eyes and the respiratory system. Thus, it is recommended that the sealant should be used only where there is adequate ventilation. Plus, protective hand gloves should be worn during product handling.
Clean eyes thoroughly with water for at least 15 minutes in case of any irritation and get immediate medical attention. Also use water for cleaning affected skin. A string acetic acid odor is released from the sealant during cure. Make sure that the product is strictly stored away from the reach of children.
Coverage / Dosage:
12 months when stored under proper storage conditions in a temperature of not more than 27°C.