PERMA CONSTRUCTION AIDS PVT. LTD.
Silicone Water Repellent Coating

Silicone Water Repellent Coating

Send Inquiry

Owing to our wide experience in this domain, we are regarded as one of the leading manufacturers, exporters and suppliers of high grade Perma Treat. The offered coating is formulated using supreme quality chemicals and latest technology at our hi-tech processing unit. Moreover, the offered coating is used for removing algae and fungus growth on stone cladding. This Perma Silicone Water Repellent Coating is stringently tested on various parameters to ensure its effectiveness.

Our offered Silicone Water Repellent Coating is vended under the brand name "Perma Treat" that appears to the colorless liquid. Being colorless in nature, it does not harm the natural appearance of the buildings. Imparting water repelling effects to the building walls, once applied, lasts long as the effects of this coating is permanent (for approximately 10 years). It works well on the structures made of stones and bricks. Depending upon the requirement of our customers, the mentioned product is available in three packaging that includes 1, 20 and 200 liters.

When To Use Silicone Water Repellent Coating?

Bulletined below are the points that describe the usage of our rendered product:

  • Inhibiting the growth of fungus and algae that occur on walls due to dampness
  • For preventing the dampening of walls during rainy season
  • To waterproof decorative and textured coatings
  • Stoppage of again process in buildings

Typical Application: To arrest dampness in walls, to stop algae and fungus growth on stone claddings.

Advantages

  • Extremely strong water repellent.
  • Easy to use and does not interfere with the color of the structures as it is colorless
  • Lasts more than 10 years and saves repainting costs

Directions For Use

Clean the surface that is to be waterproofed. Removal of dirt and oil should be done by scraping to bare the cemented layer. If the surface needs painting then the paint should be applied before applying this chemical. Our waterproofing chemical should be applied with the help of brush or airless pesticide spray pumps for better results. Once the chemical is applied, the treated surface must not come in contact of moisture for 48 hours at least.

Action

It is imperative that the concrete surface must be dry before application of the water repellant coating. This chemical works on a deeper level by penetrating deep into the pores of the surface and forming a thin protection layer that repels water.

Precautions

  • Suitable for vertical surfaces and should be used in an open air environment.
  • Wearing of masks, goggles and hand gloves is advised during spraying of chemical
  • Cannot work over paints and resists adhesion of mortar
  • Might cause stain marks on woods, glass and metal surface

Packing: Perma Treat available in 1 lit TO 20 lit.

Coverage: Covers 60 to 100 Sq ft. / Lit.