Cookie Img

Skim Coat Plaster For Wall

Skim Coat Plaster For Wall
Skim Coat Plaster For Wall
Product Code : 322
Product Description

Our Plast-O-Care is an effective skim coat. Available in powder form, it is easy to use. Having white color, it is based on white cement, well-chosen polymers & fillers. It is a water-resistant plaster, practical in 1 to 2 mm thickness per coat. This coating product is perfect for smooth even surfaces (walls & ceilings). It can be used on plasters, brick, RCC, or block work etc. 

Direction For Use:

  • Clean the surface, and remove dust, dirt, oil, grease etc.
  • Dampen the concrete or plastered surface, before use.
  • If surface has pores, then treat the surface with SBR diluted 1.
  • Mix 350-390 ml of clean water to 1 kg of Plast-O-Care.  
  • Mix thoroughly, and keep it for 5-10 minutes.
  • Re-mix to obtain even consistency of paste.
  • Apply the paste on plaster / concrete surface with putty blade or spatula.  


Packing: Available in 20 kg and 40 kg HDPE packing. 

Primary Uses: 

  • Paint to walls and ceilings.
  • Plasters, brick, RCC etc.


Shelf Life: The Plast-O-Care has a shelf life of 1 year, if stored in the original packing.  

Specification:

  • Form: Fine Powder  
  • Color: White
  • Binder: Cement  
  • Fillers: Selected mineral fillers
  • Maximum Aggregate Size: 500 micron
  • Plastic Density: 2.0
  • Bulk Density: 1.05
  • Yield: 700 ml / kg.
  • Water Requirement: 350 to 390 ml / kg
  • Coverage: 1.2 kg / m² / mm
  • Pot Life: 3 hours
  • Adhesion To Concrete: 10 kg / cm²

Our Plast-O-Care is an effective skim coat. Available in powder form, it is easy to use. Having white color, it is based on white cement, well-chosen polymers & fillers. It is a water-resistant plaster, practical in 1 to 2 mm thickness per coat. This coating product is perfect for smooth even surfaces (walls & ceilings). It can be used on plasters, brick, RCC, or block work etc. 

Direction For Use:

  • Clean the surface, and remove dust, dirt, oil, grease etc.
  • Dampen the concrete or plastered surface, before use.
  • If surface has pores, then treat the surface with SBR diluted 1.
  • Mix 350-390 ml of clean water to 1 kg of Plast-O-Care.  
  • Mix thoroughly, and keep it for 5-10 minutes.
  • Re-mix to obtain even consistency of paste.
  • Apply the paste on plaster / concrete surface with putty blade or spatula.  


Packing: Available in 20 kg and 40 kg HDPE packing. 

Primary Uses: 

  • Paint to walls and ceilings.
  • Plasters, brick, RCC etc.


Shelf Life: The Plast-O-Care has a shelf life of 1 year, if stored in the original packing.  

Specification:

  • Form: Fine Powder  
  • Color: White
  • Binder: Cement  
  • Fillers: Selected mineral fillers
  • Maximum Aggregate Size: 500 micron
  • Plastic Density: 2.0
  • Bulk Density: 1.05
  • Yield: 700 ml / kg.
  • Water Requirement: 350 to 390 ml / kg
  • Coverage: 1.2 kg / m² / mm
  • Pot Life: 3 hours
  • Adhesion To Concrete: 10 kg / cm²
Contact Us

Unit II : Plot no : 3102 G.I.D.C, Sarigam, Taluka, Umergaon, District - Valsad, Vai Vapi, Vapi, Gujarat, 396155, India
Phone :+917042619617