With rich industry experience, we are betrothed in offering high quality Perma Water Based Bitumen Emulsion. It is a polymer modified bitumen emulsion in liquid form and is widely used in general waterproofing damp places for repairing of bitumen felts. Also used for anti termite treatment, this emulsion is processed using superlative quality basic chemicals in conformity with the international quality standards. Further, this Perma Water Based Bitumen Emulsion is offered in different packaging options as per the requirements of clients.
Our offered Water Based Bitumen Emulsion is available under the brand name "Perma Bitu Coat" which appears to be dark brown in color, however, it turns into black upon drying. Being in liquid form, it is easy to apply it even at the textured surfaces. is a dark brown liquid, which turns black upon drying. The mentioned emulsion find usage for waterproofing and protecting the subsoil structures against the attack of sulphates and chlorides. Depending upon the requirement of our esteemed client, we offer this product in different packaging of 1, 2 and 20 kilograms.
Uses of Water Based Bitumen Emulsion
Pros of Using Water Based Bitumen Emulsion
Directions For Use :
Perma Bitu Coat Primer
Combine one volume of this coat with four volumes of water. One litre of Water Based Bitumen Emulsion can prime the area of 450 Sqft.
Perma Bitu Coat Putty
Combine one volume of the offered coat with double volumes of silica flour or quartz powder.
Perma Bitu Coat Mortar
This should be added with three volumes of dry natural sand. One litre of this emulsion can yield two liters of mortar.
Waterproofing brick bat coba & normal concrete :
Clean up the surface in a good manner so that all loose particles can be completely removed. It there is a crack on the surface it should be be suitably widened. Priming of the the widened cracks is needed here. Fill the cracks with the provided emulsion. The product can be applied on the slumps and pot holes for the purpose of leveling & filling. Brush apply the emulsion on entire surface with two or three coatings. Give fibre glass of scrim material at places of horizontal & vertical surfaces.
Repairing derelict bituminous felts:
Cut to widen the cracks and do away with the de-bonded felt. Fill and prime the cracks with the utilization of the provided Water Based Bitumen Emulsion. Fill the de-bonded cut out orbits with this mortar and then brush apply with the same on the total area with two coatings.
Aluminium /Asbestos /Zinc Sheet roofing:
Render scrim or fibre glass material at Bolts and junction of sheet over one coating of this coating and then brush apply with the offered emulsion on the entire surface in two or more than two coats.
Chapped drainage pipes:
Brush apply this coat on the cracked pipe. When the first coating is still wet wrap scrim fabric as well as glass around the pipe and then make second coat on the fabric.
Damp proof course:
Go for double coats of this coat on the clean plinth. Apply the second coat after four hours of basic coat. When you find the second coat wet and dewy, blind it with the help of clean sharp sand so as to render a mechanical key.
Concealed water as well as drainage pipes:
It will be prove to be a good idea, when all drainage pipes as well as concealed water will be treated with this coat. The product will give protection to concrete from the damage grounded by leakages. Utilize one coat of this product on the pipe and wrap it with fiber mesh. Employ the second coat of this emulsion and then back fill.
In majority of the cases, subsoil structures are susceptible to water pressure along with attack of termite chloride and sulphate. Therefore, before the process of back filling all subsoil structures such as footings, basement walls etc should be well coated with double coats of Water Based Bitumen Emulsion.
Use this as an anti-termite treatment as it works as a highly effectual anti-termite treatment. Most often when customary anti-termite treatments are failed, this emulsion provides permanent anti termite protection.
Typical Applications: Used in general water proofing and damp places for repairs of bitumen felts.
Packing: Accessible in 500 gms, 1 kg & 10 kg packs.
Coverage: 1 kg covers an area of 45 sqft. when applied as a primer and top coat.